Originally posted by dixieflyer
View Post
Announcement
Collapse
No announcement yet.
Whip-Stitching a CS Blanket
Collapse
X
-
Re: Whip-Stitching a CS Blanket
-
Re: Whip-Stitching a CS Blanket
Good point Brad. I already have a coverlet that needs repairs that I plan to make at Perilous Times. Otherwise, being the lazy man I am, I think I'll wait and just see what happens naturally. Thanks for all the helpful advice, etc. pards.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Warren,
I have a red with blue end stripes Child's blanket that I've used for the past 4 years, the ends are un-bound and the ravelling stopped by without my help after about an inch.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Originally posted by dixieflyer View PostI very much agree with your statement of "we want to use our gear and maintain it as "The Old Fellows" did, even though we hold it much more dearly than they might have." However, bottom line for me is this: I paid my hard-earned dollar for the blanket rather than having it issued to me by the gov't. I cannot requisition another one. Some things, if worn out, torn up, etc., are more easily replaced than others, and it seems that good blankets have always traded at a premium whether it is now or over 20 years ago.
I have owned the CRC Fed blanket, Abe Thomas, Woodburn, and a few others and not had an issue with unravelling. You might not, either.
Just a thought.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
"I would recommend unravelling some of the yarn off of the blanket itself and using that for the binding. "
"just let it unravel and look ragged..... Your average soldier could give two bits whether or not their blanket was unraveling or not"
Both of these are good suggestions. How I approach this question is what would the soldiers have on hand if that soldier would decide to bound his blankie. I have used thread I carry in my housewife and did it at a living history for something to do.
Why do this project on your couch when you can always have that spectator interaction while doing it at an event. You could even talk about how your previous blanket was so shoddy that it near came apart on its own and now that you have just been issued a new one, you are "bound" (yup pun intended) to not let it happen again.
Enjoy your new snuggle sucky blankie Linus!
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Well, that would be the easier option, huh? I do realize that a soldier would care less, I know, because I have been that soldier, LOL! I just don't want to end up with a ball of yarn in 2-3 years though. ;)
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Warren, just let it unravel and look ragged..... Your average soldier could give two bits whether or not their blanket was unraveling or not. It's only going to unravel a few inches on each side anyway. Also I've seen more original blankets without stitching on the ends than with.
Just my two cents, for what it's worth......
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Great point John, and to be honest, I don't know since I haven't seen the original from which this blanket was copied. I would very much welcome more knowledge in this area.
I very much agree with your statement of "we want to use our gear and maintain it as "The Old Fellows" did, even though we hold it much more dearly than they might have." However, bottom line for me is this: I paid my hard-earned dollar for the blanket rather than having it issued to me by the gov't. I cannot requisition another one. Some things, if worn out, torn up, etc., are more easily replaced than others, and it seems that good blankets have always traded at a premium whether it is now or over 20 years ago.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
A Few Thoughts:
1) How are the ends of the original finished, if at all? Are there other documented CS issue blankets with the ends bound? IIRC, most of the Fed blankets out there with bound ends had them bound post-war. For our impessions, we want to use our gear and maintain it as "The Old Fellows" did, even though we hold it much more dearly than they might have.
2) Whip Stitch: With this stitch, the ends of the blanket would be folded under (aka "rolled"), then the rolling held in-place by the whip stitch.
3) Blanket stitch: This would be used to bind the raw edge, without "rolling" the end first.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Originally posted by Stonewall_Greyfox View PostJust curious which Charlie Childs CS blanket you got. Most of the ones I've seen are fulled wool, and there is no need for binding the edge.
Paul B.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Thanks pards. Now that y'all mentioned pulling some from the edge, I remember someone telling me that years ago. Thanks!
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Do what Cody says, but use a blanket stitch instead of a whip stitch. It will hold the edge better.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
I would recommend unravelling some of the yarn off of the blanket itself and using that for the binding.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Hmmm Paul, I'm not sure. Just bought it, and it is a woven blanket, copied off of one with provenance of being carried at Gettysburg. I don't know if it has a "name", LOL, like the Auggie Weissert blanket, etc.
I can post a pic if it would help.
Leave a comment:
-
Re: Whip-Stitching a CS Blanket
Just curious which Charlie Childs CS blanket you got. Most of the ones I've seen are fulled wool, and there is no need for binding the edge.
Paul B.
Leave a comment:
Leave a comment: